Auto Kit For Geysers (Single) Only Gas Operated Kit

Features:

• Single-Button Operation: Easily start the geyser with a single button press.
• Adjustable Water Temperature: Control and set the water temperature to your desired level.
• Automatic Ignition: Integrated auto-ignition system.
• Auto Gas Sensing: Automatically turns the geyser on whenever gas flow is detected.

Device Usage Guidelines:

• Maintain Normal Flame: Keep the gas burner flame at a standard height.
• Check for Gas Leaks: Ensure all gas pipes are securely clamped to avoid leaks.
• Weather Protection: Shield the electronic device from rainwater.
• Temperature Limit: Set the maximum water temperature to 70°C.
• Power Supply Requirement: Use a 12V 1A power adapter.
• Support Contact: Reach out for support immediately if the unit malfunctions.

Auto Kit Operating Instructions

• Turn Off Gas Flow: Turn the gas cock dial (1) to the OFF position. Wait at least five minutes to allow any accumulated gas in the burner compartment to clear before turning the dial to the PILOT position.
• Light the Pilot: Hold down the reset button (2) while lighting the burner. Keep it pressed for 30 seconds to allow the burner to stay lit, then release it. If the pilot turns off, repeat the procedure while holding the button down longer.
• Set Desired Temperature: Turn the gas cock dial to the ON position and adjust the temperature dial (3) to your preferred setting.